Fortran 77 package MODEL version 6.60

Prague, June 2012
Vaclav Bucha
Department of Geophysics, Charles University Prague, Ke Karlovu 3, 121 16 Praha 2, Czech Republic
Petr Bulant
Department of Geophysics, Charles University Prague, Ke Karlovu 3, 121 16 Praha 2, Czech Republic
Vlastislav Cerveny
Department of Geophysics, Charles University Prague, Ke Karlovu 3, 121 16 Praha 2, Czech Republic
Ludek Klimes
Department of Geophysics, Charles University Prague, Ke Karlovu 3, 121 16 Praha 2, Czech Republic
Ivan Psencik
Institute of Geophysics, Acad. Sci. Czech Rep., Bocni II 1401, 141 31 Praha 4, Czech Republic

This is just a general overview, the detailed description of input data, procedures, and other important topics is included within the individual FORTRAN77 source code files.

Copyright note

This software package is property of its authors, is distributed in source form, and may be used free of charge. If any result obtained with help of any part of this package is published, we appreciate citation of all papers related to the used part of this package. Refer to the references related to this package.

General remarks on the SW3D software

General description

Programming language, error messages, screen output, etc.

Unified memory management.

History files.

Alphabetical list of input parameters of all programs.

New in version 6.60

Compiling and linking programs of package MODEL

All Fortran 77 source code and include files are assumed to be located in a single directory when being compiled and linked. The files with main programs contain, at their ends, Fortran 90 INCLUDE command for all subroutine files required. In this way, each program may simply be compiled and linked as a single file.
All filenames are assumed to be expressed in lowercase (since version 5.00) which should be more convenient than uppercase on Unix systems. Fortran 77 source code files have extension '.for'. The corresponding files with specifications of the COMMON blocks have extension '.inc' and are included in the Fortran 77 source code by means of Fortran 90 INCLUDE command.

Compilation and linking:

Specification of the model

The way of building the model is concisely described in the paper on C.R.T.. The model building technique is independent of the coordinate system, independent of the method used to specify and interpolate the surfaces covering structural interfaces, and independent of the functions describing the distribution of material properties within the individual complex geological blocks.

The model is specified in terms of subroutines (e.g., subroutines to evaluate the values and partial derivatives of the functions describing surfaces or material parameters) and of the input data for the subroutines. Although both the subroutines and the data may be modified by a user, most of the users wish to modify only the input data, using the interpolation routines contained within the basic version of the MODEL package.

The basic subroutines to deal with general blocky geological structures are located within the source code file 'model.for'. Among them, the most important subroutine is BLOCK determining the relation of a given point with respect to geological blocks. The data describing the model topology are described within the source code file 'model.for'.

To specify a particular model, the following routines should be available:

To deal with the first order model variations for the purposes of inverse problems, the routines VAR1 to VAR5 should be called properly during the evaluation of functions describing surfaces or material properties in order to memorize the variations. The invocations of VAR1 to VAR5 are irrelevant for forward modelling. These invocations are denoted by '*V' in the first two columns of source code (files 'model.for', 'parm.for', 'val.for', and 'fit.for'). The source code lines with '*V' should be modified or removed by means of the program 'clean.for' or a text editor. When submitting different subroutines SRFC2 and PARM2 while dealing with inverse problems, the user is responsible for proper invocation of routines VAR1 to VAR5.

Description of input data to specify the model The data are read by the subroutine MODEL1 and are described in the FORTRAN77 source code file 'model.for'.

Running programs of package MODEL

All Fortran 77 source code and include files together with all the Perl scripts and data files of packages FORMS and MODEL are assumed to be located in the same single working directory in which the programs will be run.

It is recommended to run the programs from the history files. The history files may contain the information how to execute the programs, the data read from standard input (Fortran) or from the command line (Perl) and the data read from the SEP parameter files.

Data from standard input *:
Main input data of each program are read from the standard input (denoted by * in Fortran code), and mostly consist of a single line containing filenames and at most few numerical parameters. For the description of input data of individual programs refer to the list of files below.

List of error messages

File list of package MODEL

The model specification software consists of package FORMS and of the following FORTRAN77 source code and demo files:

(A) Documentation:
model.htm
This file.
modelver.htm
List of the released versions.
modelerr.htm
List of error messages.
(B) General subroutines dealing with blocky geological structures:
model.for
Subroutines reading input data to specify a blocky seismic model for complete ray tracing (see C.R.T.3.2.1), routines to determine the position of a given point with respect to geological blocks and structural interfaces, and other auxiliary subroutines related to the model (see C.R.T.3.3). These routines assume a general form of user-defined subroutines METR1 (file 'metric.for') to define the coordinate system.
modelv.for
Version of 'model.for' for inverse problems.
model.inc
Include file with COMMON blocks for 'model.for'.
(C) Sample user-defined model specification routines required for forward modelling:
metric.for
Subroutine evaluating the metric tensor and Christoffel symbols at a given point (see C.R.T.2), and the related subroutines and external functions. Any user-defined coordinate system may simply be introduced by modification of these subroutines.
metric.inc
Include file with COMMON block for 'metric.for'.
srfc.for
Subroutines for specification and interpolation, in rectangular grids, of the functions describing smooth surfaces in the model (see C.R.T.3.2.2). Any user-defined surfaces may simply be included within the whole system by modification of these subroutines.
parm.for
Subroutines for specification and interpolation, in rectangular grids, of the material parameters within individual complex blocks in the model (see C.R.T.3.2.3). Any user-defined spatial distribution of material properties may simply be included within the whole system by modification of these subroutines.
parmv.for
Version of 'parm.for' for inverse problems.
val.for
Subroutines controlling function specification and interpolation. Designed to perform the interpolation of a set of functions in a rectangular grid, employing splines under tension. These subroutines are referred by the subroutines of files 'srfc', 'parm', and sample complete ray tracing source code file 'init'.
valv.for
Version of 'val.for' for inverse problems.
val.inc
Include file with COMMON block for 'val.for'.
fit.for
Some routines taken from Cline's software package 'FITPACK', called by the subroutines of the package 'val' to perform the spline-under-tension interpolation. Note that not all of the subroutines of the software package 'fit' are used at the same time.
fitv.for
Version of 'fit.for' for inverse problems.
auxmod.inc
Include file with COMMON block containing auxiliary storage locations for local model parameters required to call subroutines METRIC, SRFC2, PARM2 and VELOC.
(D) Additional model specification routines related to inverse modelling:
var.for
Subroutine VAR1 and its entries VAR2, VAR3, VAR4 and VAR5 are called from the model-treating subroutine packages in order to keep in the memory variations of the functions describing the model, with respect to their coefficients. The variations are required for the travel-time inversion of the model and are recalled from the memory by calling the entry VAR6.
varnul.for
Empty versions of the subroutine VAR1 and its entries VAR2 to VAR6 called from the model-treating subroutine files in order to keep in the memory variations of the functions describing the model, with respect to their coefficients. The variations are required for the travel-time inversion of the model, see also the subroutine file 'var.for'. In the case of forward modelling, the variations are useless.
spsp.for
Subroutines evaluating the Sobolev scalar products of variations of the functions describing the model, with respect to their coefficients. This raw low-level version is related rather to the low-level 'fit.for' subroutines than to 'srfc.for' and 'parm.for' model specification subroutines.
soft.for
Subroutine accumulating the prior subjective information covariance matrix describing the smoothness of the functions interpolated by means of subroutines of the file 'val.for'.
(E) Service routines useful to handle the model and to perform some calculations:
means.for
Service subroutines facilitating the work with the model. E.g., subroutine CROSS determining the point of intersection of a given curve with a given surface described by a general subroutine SRFC2 of 'srfc.for', subroutine CDE searching for the point of intersection of the given curve with the boundaries of the complex block based on the subroutine BLOCK of 'model.for', or subroutine SMVPRD mutually transforming covariant and contravariant coordinates of a vector. These routines are employed by complete ray tracing and by model imaging routines 'modsec.for'.
hder.for
Subroutines for calculation of the phase-space derivatives of the Hamiltonian in anisotropic media.
well.for
Subroutine to extract a 1-D vertical profile from the given model.
hpcg.for
Subroutine of the IBM Scientific Subroutine Package solving a system of general first order ordinary differential equations with given initial values. It is called, e.g., by the subroutine RAYCB of the complete ray tracing source code file 'raycb.for'.
rkgs.for
Subroutine of the IBM Scientific Subroutine Package solving a system of general first order ordinary differential equations with given initial values. It is called, e.g., by the subroutines of the file 'modsec.for'.
(F) Sample application programs and routines working with the model:
modchk.for
Program MODCHK checking the model consistency.
Description of input data.
modsrf.for
Program MODSRF to triangulate structural interfaces in the model.
Description of input data.
modsrf.inc
Include file with COMMON blocks for 'modsrf.for'.
bndlin.for
Program BNDLIN to write the lines forming the edges of the model box for displaying purposes.
Description of input data.
grid.for
Program GRID generating velocities in a rectangular grid required for full wave finite differences, shortest path calculation of seismic rays, eikonal equation 'finite differences', raster imaging of the model, or debugging purposes.
Description of input data.
sec.for
Program SEC to determine interfaces and velocity isolines in 2-D sections of a 3-D seismic model. May be used to generate a wireframe representing some model properties to be displayed, or to approximate interfaces by small tetragonal facets for display purposes.
Description of input data.
sec.inc
Include file with COMMON blocks for 'sec.for'.
intf.for
Program INTF to check the positions of given points with respect to interfaces in the model.
Description of input data.
coorchg.for
Program COORCHG to transform the coordinates of lines or points from Cartesian coordinates to polar spherical or geographic spherical coordinates and vice versa.
Description of input data.
invsoft.for
Program INVSOFT to evaluate the coefficients of the soft subjective a priori information on the perturbations of the model parameters. The subjective a priori information is composed of the squares of the Sobolev norms of the functions describing the model.
Description of input data.
invpts.for
Program INVPTS to calculate the derivatives of functions, describing interfaces or material parameters, with respect to the model B-spline coefficients.
Description of input data.
modmod.for
Program MODMOD designed to MODify the MODel (change the parametrization of the functions describing the model, or to update the model according to the results of smoothing or inversion).
Description of input data.
srcsrc.for
Program SRCSRC designed to update the source coordinates during the simultaneous inversion of arrival times for both model and hypocentral parameters.
Description of input data.
modle2d.for
Provisional version MODLE2D of the program designed to calculate directional Lyapunov exponents and average Lyapunov exponent for a 2-D model without interfaces. Optionally a 3-D model may be considered.
Description of input data.
(G) Source code editing programs:
clean.for
Program CLEAN to modify the lines with given letters in the first two columns.
Description of input data.
mod.pl
Perl script executing program 'clean.for' to convert model specification routines 'model.for', 'parm.for', 'val.for' and 'fit.for' for forward modelling programs into the model specification routines 'modelv.for', 'parmv.for', 'valv.for' and 'fitv.for', for inverse modelling programs.
(H) Perl script:
fmod.pl
Perl script to compile the MODEL package by means of predefined script 'f.pl'.
(I) Universal and demo data files:
sob11.dat
sob22.dat
sob22n.dat
sob22l.dat
sob33.dat
sob33n.dat
sob33l.dat
Input data for the 'invsoft.for' program specifying particular isotropic kinds of the Sobolev norm.

Notes:
Model specification routines (B) and (C) for forward modelling are likely to be required by all applications.
Example: 'grid.for' program linked with all files of (B) and (C).
In addition, some of service routines (E) are required by some applications.
Example 1: 'sec.for' program linked with the files 'modsec.for', 'means.for', 'rkgs.for', and all files of (B) and (C).
Example 2: complete ray tracing program and routines linked with 'means.for', 'hpcg.for', and all files of (B) and (C).
Inverse modelling programs are likely to require model specification routines (B) and (C) for forward modelling together with the model specification routines (D) for inverse modelling. Do not forget to use the versions with '*V' in the first two columns of source code replaced by a pair of spaces.

Data related to particular models

Acknowledgements

The development of this package and the related algorithms has been partially supported by:

References